From e8b1808eaf87a49e4c34ebbfb66854baa627418c Mon Sep 17 00:00:00 2001 From: Tucker Evans Date: Mon, 18 Feb 2019 07:35:54 -0500 Subject: Moves assignments to given course folder. --- alarm/assign.rst | 25 ------------------------- 1 file changed, 25 deletions(-) delete mode 100644 alarm/assign.rst (limited to 'alarm/assign.rst') diff --git a/alarm/assign.rst b/alarm/assign.rst deleted file mode 100644 index f9c802a..0000000 --- a/alarm/assign.rst +++ /dev/null @@ -1,25 +0,0 @@ -=========== -Alarm clock -=========== - -Write an 8051 program which implements an alarm clock. This project will -have two phases, the first of which is described here. The alarm clock -runs all the time, with the current time displayed on the four 7-segment -displays. In this first phase your clock needs to: - 1. use timers to keep time updated to the second - 2. switch between 12 hour and 24 hour modes based switch bank.0 (0==12 - hr, 1==24hr) - 3. if you are in 12 hour mode, use the decimal point on the last - 7-segment display to indicate AM or PM (off = AM, on == PM) - 4. switch between display of hours:minutes and minutes:seconds based on - switch bank.1 (0==hours:minutes, 1==minutes:seconds) - 5. keep the decimal point of the second 7-segment display lit as a - visual separator - -AM/PM should remain indicated regardless of which display mode you are -using. - -You do not (yet) need to be able to: - - set the time (pick a starting value) - - set an alarm time - - perform an alarm -- cgit v1.1